MCKESSON TRUE METRIX PRO INSTRUCTION MANUAL Pdf Download (2024)

FAQs

What is the difference between true metrix and true metrix pro? ›

The TRUE METRIX Self Monitoring and TRUE METRIX Pro Professional Monitoring Blood Glucose Systems use the same test strip. The systems differ only in the names, intended use (single-patient versus multi-patient), and claimed sample sites (venous blood can be used with multiple patient version).

The glucose monitor can be calibrated by doing a control test before testing blood glucose for the first time.

Gently squeeze another drop of control solution onto a small piece of unused aluminum foil or clear plastic wrap. With test strip in meter, touch Sample Tip of test strip to top of drop of control solution. Allow drop to be drawn into test strip. Remove test strip from drop when meter begins testing.

Control solution tests should be performed when: First receiving or purchasing the meter. Checking the meter and test strips (which should be done at least once a week). Using a new vial of test strips.

A fasting blood sugar level less than 100 mg/dL (5.6 mmol/L) is normal. A fasting blood sugar level from 100 to 125 mg/dL (5.6 to 6.9 mmol/L) is considered prediabetes. If it's 126 mg/dL (7 mmol/L) or higher on two separate tests, you have diabetes.

Excellent for accuracy. Very Good for repeatability.

The Dexcom G6 measures glucose in your interstitial fluid – that is, the fluid in between your skin and your blood. A blood glucose meter measures plasma glucose from a drop of your blood. These differences can mean that the readings from your Dexcom G6 will most likely be close, but not always exactly the same.

What Battery Does The True Metrix Air Use? This glucose monitor uses a single 3V lithium battery, which should last for roughly 1,000 tests or one year.

Check your blood sugar level with your meter at the same time that blood is drawn for lab tests, being sure to use a fingerstick sample, not blood from the blood draw. Then compare your meter's reading with the lab results. Results that are within 15% of the lab reading are considered accurate.

The system is designed to display an E-3 error message if the meter detects the test strips are compromised. E-3 message is a safety feature to alert you that the test strip may be used, or the test strip may have been left outside of vial too long or the test sample may have been applied on top of the test strip.

Can you use a glucose meter without control solution? ›

You don't always need to use control solution along with your glucose meter. Still, this product plays a crucial role for ensuring the proper functioning of glucose meters. Managing diabetes can sometimes feel confusing, like trying to find your way through a maze.

TRUE METRIX® Blood Glucose Monitoring System Troubleshooting Steps. Meter Displays E-5: Test Strip Error, or Very High Blood Glucose Result (higher than 600 mg/dL) The system is designed to display an E-5 error message if the meter detects the test strips issues or blood glucose result (higher than 600 mg/dL).

INSTRUCTIONS FOR BLOOD GLUCOSE TESTING

The meter turns on. Lance your finger. Allow a blood drop to form, touch tip of test strip to top of blood drop and allow blood to be drawn into test strip. Remove test strip sample tip from sample drop immediately after meter beeps and dashes appear across meter display.

Twist off the protective cap and pull it straight out. Place the Push-Button Safety Lancet on the desired puncture site and press the top button to activate the device. Gently apply intermittent pressure near the puncture site to obtain the required blood volume.

Control Tests should be performed: • For practice to ensure your testing technique is good, • Occasionally as you use a vial of test strips, • When opening a new vial of test strips, • If results seem unusually high or low, • If a vial has been left opened or exposed to extreme heat or cold, or humidity, • Whenever a ...